Appendix: Enclosed Power Link 2000 Considerations

Take the following considerations if placing Power Link 2000 inside an enclosed structure:

  • Cellular connectivity - Ensure the cellular signal at the Power Link 2000 (in its final configuration) meets the criteria outlined in Connectivity. Note that metal enclosures can block cellular signals. Consider installing the Ethernet to USB Kit to avoid cellular connectivity issues.

  • Heat dissipation - Ensure the enclosure allows for sufficient heat dissipation to ambient air. See Power Link 2000 Ventilation Requirements

  • Grounding - The enclosed structure must be grounded per national and local codes. If the Power Link 2000 and HV DCClosed High Voltage Direct Current wiring are installed within a conductive enclosure, be sure to bond the structure to a grounding point on the Power Link 2000.