Express 250 Trade Show Display Unit

This topic describes how to set up a ChargePoint® Express 250 Trade Show Display Unit. The station is meant for trade shows and other venues where low voltage power is needed to turn on the station’s displays and light indicators, but the station is not expected to charge a vehicle.

Check the Shipping Crate

Each station ships in one crate. Ensure you have the crate at the installation site before unpacking.

Contents

Max. Shipped Dimensions

Max. Shipped Weight

Express 250 Trade Show Display Unit crate

1270 x 1270 x 2641.6 mm

(50 x 50 x 104 in)

550.6 kg*

(1214 lb)

*Includes the weight of the crate and other included materials.

For charging station specifications other than dimensions and weights, refer to the Express 250 Datasheet found online at ChargePoint Product Reference Documentation.

Always transport and store the station in its original packaging. Use appropriate lifting equipment (forklift, crane and lifting straps, etc). Ensure the load rating of all lifting equipment is adequate for the weight of the crated station as shown above.

The station has a high center of gravity. Use care when unpacking, repacking, and transporting. If the charging station tips over it can result in death, personal injury, or property damage.

The Trade Show Display Unit crate contains the following materials:

  1. Express 250 Trade Show Display Unit

  2. Dolly covers, front and rear

  3. Power cord

    The station has a power consumption range of 85 to 264 V.

  4. Printed Installation Guide