Activity

You can quickly see a list including all vehicles and charging stations related to the selected depot. When a vehicle is currently charging in one of the charging stations at the depot, the table is automatically updated showing the updates in real time to show which vehicle is charging at which station. The following information is available in each column:

  • Charger: The name of the charging station.

  • Vehicle: The name of the vehicle.

  • Fleet: The name of the vehicle's fleet.

  • Status: The current status of the vehicle or charging session. This can also indicate issues such as an offline vehicle telematics hardware. The different type of status are:

    • Charging: The vehicle is charging.

    • Unplugged: The vehicle was disconnected from the charger.

    • Vehicle Late: The vehicle won't be sufficiently charged by its scheduled departure time.

    • Ready: The vehicle has finished charging and is ready for use.

    • Station Fault: The charging session was interrupted due to a charger fault.

    • On Trip: The vehicle is currently in operation.

  • Power (kW): The live power consumption during a charging session.

  • SOC: The vehicle's battery state of charge.

  • Estimated Range: The estimated range of the vehicle based on its current SOC. This range is calculated using historical data and metadata for the vehicle model. A visual bar shows the current estimated range. The black chevron on the bar indicates the minimum SOC required for the next scheduled trip based on the dispatch configuration.

    • Gray bar (diagonal stripes): Represents the last known value from the most recent telematics signal.

    • Solid gray bar: Indicates newly received information from telematics.

    • Green bar: The SOC is sufficient for the scheduled trip.

  • Departure Time: The vehicle's scheduled departure time according to the dispatch plan.

  • Charge Complete: The estimated time the vehicle will finish charging and be ready for departure. Charging sessions are automatically prioritized based on departure times. If there is a conflict or no departure time is set, the system uses the Site power limit for prioritization. You can manually set a session's priority to High.