Apply the Electrical Ratings Label

To ensure compliance with inspection standards, apply the correct amperage label to both the charging station and the circuit breaker.

Required Item

ChargePoint Home Flex Amperage Label Sheet (included in box)

  1. Find the sheet titled ChargePointHome Flex Amperage Labels in the packaging. It contains amperage labels in English, French, and Spanish for 16 A, 24 A, 32 A, 40 A, 48 A, and 50 A.

  2. Confirm the amperage setting is configured during installation.

  3. Peel the label that matches the configured amperage from the bottom of the sheet.

  4. Locate the designated label area on the bottom edge of the charging station. Refer to the diagram below for exact placement.


  5. Firmly press the label onto the surface to ensure adhesion.

  6. Place a duplicate label on the breaker that supplies the EVClosed Electric Vehicle charging label in the electrical panel. This helps inspectors verify the amperage configuration.

  7. Ensure the label is clearly visible and legible.

    Failure to apply the amperage label to the charging station and circuit breaker may result in failed inspection.