Complete Station Setup

To complete the setup, you must have completed the installer training and received your installer login. To complete the next steps, you need:

  • Installer login

  • Activation label (including the MACClosed Message Authentication Code address), if not already applied to top cap

  • A smartphone with a camera, QRClosed Quick Response code scanning (usually built into the camera app), Internet connectivity, and the app

  • The exact location (to the parking space) where the CP6000 charging station is physically installed

Power Up

Power up the station at the breaker panel. If the station does not power up, turn power back off and check that the head assembly is fully seated into the housing.

Make sure that the terminal block is switched ON, Red indicates power is ON, Green indicates power is OFF.

Technical illustration depicts the procedural step.