Introduction

This topic provides an introduction to the ChargePoint® Express Plus Power Link 1000.

Express Plus Components

Express Plus is a scalable DC fast charging platform that is based on the modular building blocks outlined below.

Express Plus modular building blocks

  1. Power Module is the power conversion component. It converts the upstream AC power into DC power to output up to 40 kW of power.

  2. Power Block contains Power Modules. It can accommodate up to five Power Modules and has two DC outputs, capable of delivering up to 200 kW of power.

  3. Power Link 1000 is the charger. It receives DC power from Power Blocks. A Power Link 1000 can accommodate up to two charging cables to charge two electric vehicles sequentially.

For full specifications and certifications, refer to the Power Link 1000 Datasheet at ChargePoint Product Reference Documentation.

For sites that include Power Hub (an optional component of Express Plus), refer to the Power Hub Site Design Guide and Installation Guide.

Express Plus Guides

Access ChargePoint documents at ChargePoint Product Reference Documentation.

ChargePoint Product Documents

Document

Content

Primary Audiences

Datasheet

Full station specifications

Site designer, installer, and station owner

Site Design Guide

Civil, mechanical, and electrical guidelines to scope and construct the site

Site designer or engineer of record

Concrete Mounting Template Guide

Instructions to embed the charging station template in a concrete pad with anchor bolts and conduit placement (these may also be included in the Site Design Guide)

Site construction contractor

Surface Conduit Entry Kit Guide

Instructions for sites where conduit cannot be run underground

Installer

Construction Signoff Form

Checklists used by contractors to ensure the site is correctly completed and ready for product installation

Site construction contractor

Installation Guide

Anchoring, wiring, and powering on

Installer

Operation and Maintenance Guide

Operation and preventive maintenance information

Station owner, facility manager, and technician

Service Guide

Component replacement procedures, including optional components

Service technician

Declaration of Conformity

Statement of conformity with directives

Purchasers and public