Reseat the SIM Card

SIM reseat is the process of removing a SIM card from its slot and reinserting it properly.

Required Tools and Materials

Tools and Materials

Serrated tweezer

T25 Torx security screwdriver

90% Isopropyl wipes and towel roll

Clean rags

Clean rag

Flat head screwdriver

    

Before you Begin

Complete the following procedures:

  1. Power Off the Station.

  2. Remove the Area Light Bar.

  3. Remove the LED Display.

  4. Remove the Top Front Panel.

Reseat the SIM Card

To reseat the SIM card, perform the following steps:

  1. Lift the SIM plug located on the left side of the Touchscreen.

  2. Gently push the existing SIM card with a flat-head screwdriver or a thin, rigid piece of plastic to eject the SIM card from its slot.

  3. Inspect the SIM card and slot for dust or damage; clean the SIM card gently using isopropyl alcohol if needed.

  4. Insert the notched edge of the SIM card into the slot with the notch facing upward.

  5. Slide it into the slot and use corner of the SIM card’s carrier or a tweezer to push it fully into the slot until it clicks into place.

  6. Once the SIM card is secured, secure the SIM plug in its original position.

    7. REVERSE THE ABOVE STEPS TO REPLACE THE EMIClosed Electromagnetic Interference SHIELD (IF APPLICABLE), REAR PANELS, FRONT PANELS, LED DISPLAY, AND AREA LIGHT BAR.

    Power On the Station.